mzd
Feb 1, 10:50 AM
Benevento/Russo Duo
Godspeed You! Black Emperor
Medeski Martin & Wood
John Zorn's Masada
Godspeed You! Black Emperor
Medeski Martin & Wood
John Zorn's Masada
VideoNewbie
Nov 29, 04:10 AM
Hey i sent you a PM. pls check it when u get a chance thank u
bump
lucidmedia never answered my pm..
any of his/her friends mind giving him a nudge?
i still need more concrete clarification on whether to trademark or copyright the logo for my company...
(ps i am 18 years old so need to make best decision by research done online dont currently have funds to hire a copyright lawyer to make the decision for me)
bump
lucidmedia never answered my pm..
any of his/her friends mind giving him a nudge?
i still need more concrete clarification on whether to trademark or copyright the logo for my company...
(ps i am 18 years old so need to make best decision by research done online dont currently have funds to hire a copyright lawyer to make the decision for me)
kugino
Jun 12, 04:58 PM
yeah, i'm not sure what time i'll head to the mall...probably sometime around 6-ish. at&t store is closer to where i live, but come on, who wants to go to an at&t store?
xyfish
May 2, 06:07 AM
hmmm I'm asking if anyone has this case to rate the slip in and out of pocket. Ifound the rubbers on the griffin reveal frame to be impossible to slip in and out and gave up with the case. if this has the same rubber I'll avoid it and pick up the incase instead
i am using the Speck see thru satin and the "rubber lip" around the front screen is abit grippy and rubbery. Its not the texture like glossy TPUs.
But then i feel that i have no problem taking out of my jeans pocket.
i am using the Speck see thru satin and the "rubber lip" around the front screen is abit grippy and rubbery. Its not the texture like glossy TPUs.
But then i feel that i have no problem taking out of my jeans pocket.
more...
asphalt-proof
Dec 2, 01:21 PM
Smalldog lists the their used iMac (with the same specs as mine except mine has more ram) at $800. $1000 may be high but that's why this is just a feeler. I do have some additional software but my son destroyed the discs (love my 1year old!!) I have dmg. of a few of the programs. I realize though that I can't list them on this forum.
Kagetenshi
Dec 31, 01:36 AM
I'd have to go with Bungie before they died. It's somewhat odd to think about, but I really don't use many non-game applications that weren't made by Apple (Finder, TextEdit, Appleworks, Mail, Safari, iTunes, iCal, Calculator, XCode, and Terminal get me through most days).If I had to choose a serious application, it'd be Fire and whoever makes that.
~J
~J
more...
cmckee@therober
Sep 28, 09:14 AM
Thanks a lot everybody, I appreciate it!
patrick0brien
Jul 3, 04:54 PM
-crenz, jayscheuerle
It occurs to me that I see all kinds of threads about 'hackin' or upgrading a Mac that is 8 or more years old so that it can run with the latest software.
It's interesting because these machines are still working well enough to want to do this to.
How many threads do you see about PC users wishing to do the same?
Food for thought.
It occurs to me that I see all kinds of threads about 'hackin' or upgrading a Mac that is 8 or more years old so that it can run with the latest software.
It's interesting because these machines are still working well enough to want to do this to.
How many threads do you see about PC users wishing to do the same?
Food for thought.
more...
twoodcc
Jul 25, 03:49 PM
i need to get on this and download it
MrCommunistGen
Sep 20, 12:23 PM
Is anyone else having trouble getting new WUs? Ever since yesterday I have not been able to get replacement WUs to replace my finished ones on my 2 main computers. I keep on getting a 503 error from the server which I believe means that the server is down... but I just moved to college a couple of days ago and these are my first new WUs since moving so it could be something funny about the internet here. Anyone know what might be going wrong?
Thanks!
mcg
UPDATE: I've been able to get a new WU on one of my two computers here in college, so I don't think its the 'net connection. The other computer still hasn't picked up a WU though... still error 503.
Thanks!
mcg
UPDATE: I've been able to get a new WU on one of my two computers here in college, so I don't think its the 'net connection. The other computer still hasn't picked up a WU though... still error 503.
more...
NateEssex
Apr 22, 10:24 PM
Hi all,
I need a "cheap", read inexpensive, GSM qwerty keyboard cell phone for my mom. I was going to go on eBay and buy a Blackberry Curve 8310, but then saw it requires a data plan with AT&T. I would like to avoid a mandatory data plan requirement, since she'll never use it.
I just need good audio quality and text messaging.
Any help would be greatly appreciated.
I need a "cheap", read inexpensive, GSM qwerty keyboard cell phone for my mom. I was going to go on eBay and buy a Blackberry Curve 8310, but then saw it requires a data plan with AT&T. I would like to avoid a mandatory data plan requirement, since she'll never use it.
I just need good audio quality and text messaging.
Any help would be greatly appreciated.
Blackhatch
Apr 4, 01:43 AM
I have read all the threads, links, and intimations. Some of the links are a bit dated.
What is the best format to record video on that plays nicely with the MAC?
I need to shoot some video content for my website and get it edited up for use.
Thanks.
What is the best format to record video on that plays nicely with the MAC?
I need to shoot some video content for my website and get it edited up for use.
Thanks.
more...
lordonuthin
Oct 21, 09:05 PM
Still haven't figured out what the problem is with GPU2 in wine.
[19:50:44] Working on queue slot 01 [October 21 19:50:44 UTC]
[19:50:44] + Working ...
Warning: Ignoring unknown arg
[19:50:44]
[19:50:44] *------------------------------*
[19:50:44] Folding@Home GPU Core - Beta
[19:50:44] Version 1.25 (Mon Mar 2 19:49:32 PST 2009)
[19:50:44]
[19:50:44] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[19:50:44] Build host: vspm46
[19:50:44] Board Type: Nvidia
[19:50:44] Core :
[19:50:44] Preparing to commence simulation
[19:50:44] - Looking at optimizations...
[19:50:44] - Created dyn
[19:50:44] - Files status OK
[19:50:44] - Expanded 68640 -> 357580 (decompressed 520.9 percent)
[19:50:44] Called DecompressByteArray: compressed_data_size=68640 data_size=357580, decompressed_data_size=357580 diff=0
[19:50:44] - Digital signature verified
[19:50:44]
[19:50:44] Project: 5915 (Run 13, Clone 422, Gen 13)
[19:50:44]
[19:50:44] Assembly optimizations on if available.
[19:50:44] Entering M.D.
Reading file work/wudata_01.tpr, VERSION 3.1.4 (single precision)
Reading file work/wudata_01.tpr, VERSION 3.1.4 (single precision)
Reading sasa-enabled ir 0 0
Initializing Nvidia gpu library
[19:50:50] Tpr hash work/wudata_01.tpr: 2601313573 3913075720 1380217986 614781101 1211686473
Run: exception thrown during GuardedRun
[19:50:50] SEH code: 3221225477
[19:50:50] Run: exception thrown during GuardedRun
[19:50:50] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.
[19:50:50] Going to send back what have done -- stepsTotalG=0
[19:50:50] Work fraction=0.0000 steps=0.
[19:50:54] logfile size=4917 infoLength=4917 edr=0 trr=23
[19:50:54] - Writing 5453 bytes of core data to disk...
[19:50:54] Done: 4941 -> 1839 (compressed to 37.2 percent)
[19:50:54] ... Done.
[19:50:54]
[19:50:54] Folding@home Core Shutdown: UNSTABLE_MACHINE
[19:50:44] Working on queue slot 01 [October 21 19:50:44 UTC]
[19:50:44] + Working ...
Warning: Ignoring unknown arg
[19:50:44]
[19:50:44] *------------------------------*
[19:50:44] Folding@Home GPU Core - Beta
[19:50:44] Version 1.25 (Mon Mar 2 19:49:32 PST 2009)
[19:50:44]
[19:50:44] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[19:50:44] Build host: vspm46
[19:50:44] Board Type: Nvidia
[19:50:44] Core :
[19:50:44] Preparing to commence simulation
[19:50:44] - Looking at optimizations...
[19:50:44] - Created dyn
[19:50:44] - Files status OK
[19:50:44] - Expanded 68640 -> 357580 (decompressed 520.9 percent)
[19:50:44] Called DecompressByteArray: compressed_data_size=68640 data_size=357580, decompressed_data_size=357580 diff=0
[19:50:44] - Digital signature verified
[19:50:44]
[19:50:44] Project: 5915 (Run 13, Clone 422, Gen 13)
[19:50:44]
[19:50:44] Assembly optimizations on if available.
[19:50:44] Entering M.D.
Reading file work/wudata_01.tpr, VERSION 3.1.4 (single precision)
Reading file work/wudata_01.tpr, VERSION 3.1.4 (single precision)
Reading sasa-enabled ir 0 0
Initializing Nvidia gpu library
[19:50:50] Tpr hash work/wudata_01.tpr: 2601313573 3913075720 1380217986 614781101 1211686473
Run: exception thrown during GuardedRun
[19:50:50] SEH code: 3221225477
[19:50:50] Run: exception thrown during GuardedRun
[19:50:50] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.
[19:50:50] Going to send back what have done -- stepsTotalG=0
[19:50:50] Work fraction=0.0000 steps=0.
[19:50:54] logfile size=4917 infoLength=4917 edr=0 trr=23
[19:50:54] - Writing 5453 bytes of core data to disk...
[19:50:54] Done: 4941 -> 1839 (compressed to 37.2 percent)
[19:50:54] ... Done.
[19:50:54]
[19:50:54] Folding@home Core Shutdown: UNSTABLE_MACHINE
Rapmastac1
Sep 16, 01:29 AM
I'm very detailed when it comes to taking care of my iTunes library. I have almost 6,000 songs and I average about 80 new songs a month (mostly cd compilations). I rarely every buy actual physical cds unless it's for an album I really love, so it gets the shelf treatment.
I use all the fields rather normally. I prefer to only have a few basic Genres which I then break down under the "Grouping" tag. I use various tags for various reasons. I use the grouping for the sub-genre, and naming the record label. The lyrics tab is used as a way to put track-lists in songs that are one continuous track. The comments section is used for tracks that are complete (aka they have all the track information and album art embedded into the file itself). And once every year I have a program that runs through and finds the BPM of each track.
Now don't even get me started on playlists and playlist folders.
I use all the fields rather normally. I prefer to only have a few basic Genres which I then break down under the "Grouping" tag. I use various tags for various reasons. I use the grouping for the sub-genre, and naming the record label. The lyrics tab is used as a way to put track-lists in songs that are one continuous track. The comments section is used for tracks that are complete (aka they have all the track information and album art embedded into the file itself). And once every year I have a program that runs through and finds the BPM of each track.
Now don't even get me started on playlists and playlist folders.
more...
dolphin842
Feb 20, 04:32 PM
There is nothing wrong with buying ram from a 3rd party. Check out OWC. (http://www.macsales.com/)
I've used OWC for ages, but I've been through two of their NuRAM sets for my Mini and have had serious problems (kernel panics, memtest errors, etc).
I just picked up an 8GB G.Skill pair from newegg for $70. Here's a list (http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007609+600000401+600006178+600000445&QksAutoSuggestion=&ShowDeactivatedMark=False&Configurator=&IsNodeId=1&Subcategory=381&description=&Ntk=&CFG=&SpeTabStoreType=&srchInDesc=) of DDR3 PC8500 ram.
I've used OWC for ages, but I've been through two of their NuRAM sets for my Mini and have had serious problems (kernel panics, memtest errors, etc).
I just picked up an 8GB G.Skill pair from newegg for $70. Here's a list (http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007609+600000401+600006178+600000445&QksAutoSuggestion=&ShowDeactivatedMark=False&Configurator=&IsNodeId=1&Subcategory=381&description=&Ntk=&CFG=&SpeTabStoreType=&srchInDesc=) of DDR3 PC8500 ram.
SmurfBoxMasta
Dec 18, 02:51 PM
Daedalus256,
Any closer to a decision yet on parting out your machine ?
Just wondering, as it seems you have several interested potential buyers, like me :)
Any closer to a decision yet on parting out your machine ?
Just wondering, as it seems you have several interested potential buyers, like me :)
more...
nanofrog
Apr 24, 09:32 PM
So I'm a freelance Editor/Motion Graphics guy with no real understanding of RAID Controller Cards, or how they work.
As of right now I have three 1TB drives inside my Mac Pro, RAIDed together (stripe 0) using the OS. No Raid card.
The drives are all 7200rpm from varying manufacturers. (not sure if this matters.)
My questions is; is it beneficial for me to get a RAID card to control these drives vs. leaving it to the OS to handle? Any suggestions for me?
Thanks.
2010 8-Core Mac Pro 2.4
14GB RAM
It all depends on the details of how you use the system (RAID is supposed to be configured to the specific usage, so there's no "one size fits all", though for narrowed usage patterns, you will see similarities).
I'd advise you to search out previous RAID threads (there's quite a few), and pay attention to the various questions asked, and get back to us with some answers). I'd also recommend you review Wiki's RAID page (http://en.wikipedia.org/wiki/RAID) (pay particular attention to the different levels).
If you're a paid professional, using a stripe set (RAID 0) is a disaster waiting to happen. Even with a backup, you'll spend a fair bit of time to perform a recovery when a disk dies (matter of when, not if), and this also means re-performing work that was done between the most recent backup and when the array failed (beyond replacing the bad disk and restoring all the backup files, which presumably <worst case>, will be multiples to return all the data you have from your backup media).
Glad to see you at least have some sort of backup with your current configuration. :)
Now if you go with a RAID card, you'll need to use enterprise grade drives for stability reasons (different recovery timings in the firmware than consumer models, which tend to be unstable as a result). Unfortunately, they're not as cheap (in fact, can be 2x as expensive as their consumer counterparts for the latest capacity).
Consumer disks are fine for backup purposes though, and this can save you a considerable amount of funds, particularly if your capacity requirements are high (i.e. eSATA card + Port Multiplier based external enclosure; example kit (http://www.newegg.com/Product/Product.aspx?Item=N82E16816111136&cm_re=tr4mp-_-16-111-136-_-Product)).
There are some inexpensive products that claim RAID 5, but be careful. Some are software based, which should never be used for this level (no solution to the "write hole issue" associated with parity based arrays). Others use very inexpensive hardware RAID controllers (aka RoC = RAID on a Chip). They're slow for primary usage, and is why they're cheap (compromise on performance vs. proper RAID cards).
If on a budget you could go with RAID-Z, it involves switching to the ZFS file system. RAID-Z1 apparently offers similar performance to RAID5. Read this thread (http://forums.macrumors.com/showthread.php?t=1135718) for further insight.
This can get complicated on the software end though, and not recommended for those that aren't comfortable with the additional complexity (patches for OS X or via VM), particularly for a DAS system (has more merit with NAS or SAN IMO).
So I'd stick with a 3rd party hardware RAID card, assuming this is actually needed, enterprise disks and any enclosures/mounting hardware necessary. Much simpler in terms of software (install the drivers, and any interface software that's required to access the card settings), and the hardware aspect isn't that difficult either.
I would get an SSD for the OS and use the 3x 7200rpm Disks in RAID5.
RAID5 is great for storing uncompressed video data and in your case would offer protection against a single drive failure.
Most cards don't deal with consumer grade disks very well (ATTO and Area definitely don't).
But consumer disks are fine for backup purposed (i.e via eSATA and PM enclosures) due to the lower duty cycle (where you can cut costs effectively, and not endanger the data).
or Just RAID5 with 3x HDD's and partition the RAID volume.
I wouldn't do this if both partitions are to be used simultaneously (i.e. primary data one one partition, scratch data on the other).
The most recommend cards right now are the Areca 6g 1880 series or the new ATTO 6G series. For your needs something like the ARC-1880-i SAS 6G RAID Controller would suffice if you don't plan to connect external RAID/Storage solution.
Those are the best recommendations as far as brand and series per. As to a specific model, it will depend on the specifics, particularly for growth (i.e 8 ports may be outgrown in under 3 years, so getting a card with sufficient ports to last that long would be cheaper in the long run - just add disks and enclosures as necessary).
Sorry should have been more clear (like I said I'm dumb) I have a 500GB Boot drive that lives independently from the (3) 1TB drives RAIDED together via the OS.
A separate boot disk is advisable, as you still have a working OS if the array goes down (allows you to access the card, use the browser to search for help, or deal with Support from the card manufacturer if needed).
And ALL data (3.5TB's) is backed up by an external 4TB Time Machine RAID (2 drives @ 2TB each)...which is connected via 2 eSATA cables via the eSATA PCI Card I bought from OWC...which I guess is actually RAIDed by the OS as well.
That backup solution is a RAID 0. The overall backup solution will almost certainly need to change in order to be sufficient for the primary storage pool you'll end up with.
Not sure what you are looking at, since 3 drives is sort of an odd combination. I have a 2009/2010 Mac Pro Nehalem, running the apple sas card for the 4 internal bays (yes I know they make adapters to use 3rd party cards), and the performance is fair, not great but fair. About 300Mb/s read/write with 4 WD Black edition drives (1tb each). Externally, running an Areca 1680x card, with a 8 drive ProAvio chassis, 8 SAS Seagate 15k7 drives (450GB) which gives close to 900MB/s. I have tried multiple cards over the years, nano and I have exchanged lots of posts/messages. Email/PM me with specific questions and I will try and help you. Beware of most of these 3rd party slot adapters/etc. they are more hassle than they are worth.
I've not heard or seen any issues with the MaxUpgrades kit.
As per Apple's card, I'm no fan of it, particularly due to the cost/performance ratio.
BTW, the OP only has 2 posts at the time of writting this, so returning a PM isn't possible yet (needs to have 5 posts IIRC). email would work if you have that enabled.
As of right now I have three 1TB drives inside my Mac Pro, RAIDed together (stripe 0) using the OS. No Raid card.
The drives are all 7200rpm from varying manufacturers. (not sure if this matters.)
My questions is; is it beneficial for me to get a RAID card to control these drives vs. leaving it to the OS to handle? Any suggestions for me?
Thanks.
2010 8-Core Mac Pro 2.4
14GB RAM
It all depends on the details of how you use the system (RAID is supposed to be configured to the specific usage, so there's no "one size fits all", though for narrowed usage patterns, you will see similarities).
I'd advise you to search out previous RAID threads (there's quite a few), and pay attention to the various questions asked, and get back to us with some answers). I'd also recommend you review Wiki's RAID page (http://en.wikipedia.org/wiki/RAID) (pay particular attention to the different levels).
If you're a paid professional, using a stripe set (RAID 0) is a disaster waiting to happen. Even with a backup, you'll spend a fair bit of time to perform a recovery when a disk dies (matter of when, not if), and this also means re-performing work that was done between the most recent backup and when the array failed (beyond replacing the bad disk and restoring all the backup files, which presumably <worst case>, will be multiples to return all the data you have from your backup media).
Glad to see you at least have some sort of backup with your current configuration. :)
Now if you go with a RAID card, you'll need to use enterprise grade drives for stability reasons (different recovery timings in the firmware than consumer models, which tend to be unstable as a result). Unfortunately, they're not as cheap (in fact, can be 2x as expensive as their consumer counterparts for the latest capacity).
Consumer disks are fine for backup purposes though, and this can save you a considerable amount of funds, particularly if your capacity requirements are high (i.e. eSATA card + Port Multiplier based external enclosure; example kit (http://www.newegg.com/Product/Product.aspx?Item=N82E16816111136&cm_re=tr4mp-_-16-111-136-_-Product)).
There are some inexpensive products that claim RAID 5, but be careful. Some are software based, which should never be used for this level (no solution to the "write hole issue" associated with parity based arrays). Others use very inexpensive hardware RAID controllers (aka RoC = RAID on a Chip). They're slow for primary usage, and is why they're cheap (compromise on performance vs. proper RAID cards).
If on a budget you could go with RAID-Z, it involves switching to the ZFS file system. RAID-Z1 apparently offers similar performance to RAID5. Read this thread (http://forums.macrumors.com/showthread.php?t=1135718) for further insight.
This can get complicated on the software end though, and not recommended for those that aren't comfortable with the additional complexity (patches for OS X or via VM), particularly for a DAS system (has more merit with NAS or SAN IMO).
So I'd stick with a 3rd party hardware RAID card, assuming this is actually needed, enterprise disks and any enclosures/mounting hardware necessary. Much simpler in terms of software (install the drivers, and any interface software that's required to access the card settings), and the hardware aspect isn't that difficult either.
I would get an SSD for the OS and use the 3x 7200rpm Disks in RAID5.
RAID5 is great for storing uncompressed video data and in your case would offer protection against a single drive failure.
Most cards don't deal with consumer grade disks very well (ATTO and Area definitely don't).
But consumer disks are fine for backup purposed (i.e via eSATA and PM enclosures) due to the lower duty cycle (where you can cut costs effectively, and not endanger the data).
or Just RAID5 with 3x HDD's and partition the RAID volume.
I wouldn't do this if both partitions are to be used simultaneously (i.e. primary data one one partition, scratch data on the other).
The most recommend cards right now are the Areca 6g 1880 series or the new ATTO 6G series. For your needs something like the ARC-1880-i SAS 6G RAID Controller would suffice if you don't plan to connect external RAID/Storage solution.
Those are the best recommendations as far as brand and series per. As to a specific model, it will depend on the specifics, particularly for growth (i.e 8 ports may be outgrown in under 3 years, so getting a card with sufficient ports to last that long would be cheaper in the long run - just add disks and enclosures as necessary).
Sorry should have been more clear (like I said I'm dumb) I have a 500GB Boot drive that lives independently from the (3) 1TB drives RAIDED together via the OS.
A separate boot disk is advisable, as you still have a working OS if the array goes down (allows you to access the card, use the browser to search for help, or deal with Support from the card manufacturer if needed).
And ALL data (3.5TB's) is backed up by an external 4TB Time Machine RAID (2 drives @ 2TB each)...which is connected via 2 eSATA cables via the eSATA PCI Card I bought from OWC...which I guess is actually RAIDed by the OS as well.
That backup solution is a RAID 0. The overall backup solution will almost certainly need to change in order to be sufficient for the primary storage pool you'll end up with.
Not sure what you are looking at, since 3 drives is sort of an odd combination. I have a 2009/2010 Mac Pro Nehalem, running the apple sas card for the 4 internal bays (yes I know they make adapters to use 3rd party cards), and the performance is fair, not great but fair. About 300Mb/s read/write with 4 WD Black edition drives (1tb each). Externally, running an Areca 1680x card, with a 8 drive ProAvio chassis, 8 SAS Seagate 15k7 drives (450GB) which gives close to 900MB/s. I have tried multiple cards over the years, nano and I have exchanged lots of posts/messages. Email/PM me with specific questions and I will try and help you. Beware of most of these 3rd party slot adapters/etc. they are more hassle than they are worth.
I've not heard or seen any issues with the MaxUpgrades kit.
As per Apple's card, I'm no fan of it, particularly due to the cost/performance ratio.
BTW, the OP only has 2 posts at the time of writting this, so returning a PM isn't possible yet (needs to have 5 posts IIRC). email would work if you have that enabled.
Mookinator98
Apr 26, 07:20 AM
The Mac Mini, iMac and Macbooks will all be updated some time soon. The Mac Mini and Macbook will get Core i3 @2.1GHz, with the Intel HD 3000 GPU. iMacs will have a base model with Core i5. The Mini and Macbook will be far more powerful than they are now - the Core 2 Duos are outdated now. It also depends on whether you have got your own keyboard, mouse and display. If you have, and you're happy to use them, the Mac Mini will probably save you a bit of cash.
Avril Lavigne Clothes
chrisperro
Apr 29, 07:54 PM
Was it turned off when you spilt it? I spilt water onto my MBP and nothing happened, luckily it was turned off (the battery was dead so it entered deep sleep mode).
it was on at the time and die right after the spill and after a few days i decided the alcohol solution.
The motherboard was cover in wine and i actually use an electric toothbrush to clean it.
it was on at the time and die right after the spill and after a few days i decided the alcohol solution.
The motherboard was cover in wine and i actually use an electric toothbrush to clean it.
toxthexnines
Oct 19, 10:42 AM
I don't know if i am on friday but definately on saturday, i live in bartlesville but im going with a friend to a scion party on saturday so im sure to pick up a copy then.
Rodimus Prime
Apr 18, 12:43 PM
Why...?
16 MP in a phone for what?
well I would say 16MP would be great for when I need to take a snap shot of someone homework or something posted somewhere. Easier to zoom in and read the text. But for taking good phoses I will take an SLR or a dedicated camera.
My 4MP digital camera from 7 years ago takes better photos than any camera phone I have seen no matter the Megapixels. But then again that camera does have better optics than any phone could ever have on it.
16 MP in a phone for what?
well I would say 16MP would be great for when I need to take a snap shot of someone homework or something posted somewhere. Easier to zoom in and read the text. But for taking good phoses I will take an SLR or a dedicated camera.
My 4MP digital camera from 7 years ago takes better photos than any camera phone I have seen no matter the Megapixels. But then again that camera does have better optics than any phone could ever have on it.
gusyouout
Apr 7, 05:35 PM
I like. Since I've got the Speck PixelSkin HD right now I wouldn't mind if it's bulky. If the kickstand is removable and the price is reasonable I'd get one. Really feeling the black/red colorway.
MacFan25
Jun 24, 06:42 PM
I'm glad to hear that you are liking your iBook. You will probably get used to the keyboard soon. :)
rdowns
Feb 9, 03:41 PM
Angry Birds will kick ass on that.