Coppertop
10-18 03:13 PM
Unless I am mistaken, the battle is over! (and if it isn't, it should be)
congradulations to Phat7 for winning the "best edited picture"!
congradulations to Phat7 for winning the "best edited picture"!
wallpaper KAMEN RIDER DECADE
pmpforgc
11-22 03:09 PM
Hi
I am working in University in US and my I-140 (EB-2 Sch-A) is approved and my I-485 is pending. I have H-1B approved from March-06 but yet not stamped.
I am planing to Go to India some time next summer.
But before that I am planing to go to MEXICO ( MATAMOROS) for H-1B and
H-4 stamping for my family.
Do I need to carry any extra documents apart from those needed for H-1 B stamping?
DO I need to Get Advance parole before going to mexico for H-1B stamping?
Does the my going out of country with pending I-485 without taking AP will affect pending application of I-485?
Your experienced advise will help me a lot.
I am working in University in US and my I-140 (EB-2 Sch-A) is approved and my I-485 is pending. I have H-1B approved from March-06 but yet not stamped.
I am planing to Go to India some time next summer.
But before that I am planing to go to MEXICO ( MATAMOROS) for H-1B and
H-4 stamping for my family.
Do I need to carry any extra documents apart from those needed for H-1 B stamping?
DO I need to Get Advance parole before going to mexico for H-1B stamping?
Does the my going out of country with pending I-485 without taking AP will affect pending application of I-485?
Your experienced advise will help me a lot.
omved
08-14 07:10 PM
Hi Friends,
While filing I 131, I came across this information
"{If you are in the United States and wish to travel abroad, you do not need to apply for advance parole if both conditions described below in A and B are met:
A. You are in one of the following nonimmigrant categories:
1. An H-1, temporary worker, or H-4, spouse, or child of an H-1; or
2. An L-1, intracompany transferee, or L-2, spouse or child of an L-1; or
3. A K-3, spouse, or K-4, child of a U.S. citizen; or
4. A V-2, spouse, or V-3, child of a lawful permanent resident; and
B. A Form I-485, Application to Register Permanent Residence or Adjust Status, was filed on your behalf and is pending with USCIS.
However, upon returning to the United States, you must present your valid H, L, K, or V nonimmigrant visa and continue to remain eligible for that status}"
My 797 petition is approved till 2011 but my H1B visa is not stamped. I am planning India trip in November. What would be appropriate for me..
Should I get H1B stamped in Mexico / Canada / India
OR
Should I apply for AP.
I have heard that after applying AP we should really not leave the country until decision has been made on AP application. I fear if I apply for AP now, probably it would not be approved by first week of November.
I don't know what to do. Any help pls..
Thanks
Omved
1485 ND august 15, 2007 in NE - No LUD so far. Infopass appointment confirmed FP/back ground check completed
H1b 7th year in extension
EB 2 - PD April 06
While filing I 131, I came across this information
"{If you are in the United States and wish to travel abroad, you do not need to apply for advance parole if both conditions described below in A and B are met:
A. You are in one of the following nonimmigrant categories:
1. An H-1, temporary worker, or H-4, spouse, or child of an H-1; or
2. An L-1, intracompany transferee, or L-2, spouse or child of an L-1; or
3. A K-3, spouse, or K-4, child of a U.S. citizen; or
4. A V-2, spouse, or V-3, child of a lawful permanent resident; and
B. A Form I-485, Application to Register Permanent Residence or Adjust Status, was filed on your behalf and is pending with USCIS.
However, upon returning to the United States, you must present your valid H, L, K, or V nonimmigrant visa and continue to remain eligible for that status}"
My 797 petition is approved till 2011 but my H1B visa is not stamped. I am planning India trip in November. What would be appropriate for me..
Should I get H1B stamped in Mexico / Canada / India
OR
Should I apply for AP.
I have heard that after applying AP we should really not leave the country until decision has been made on AP application. I fear if I apply for AP now, probably it would not be approved by first week of November.
I don't know what to do. Any help pls..
Thanks
Omved
1485 ND august 15, 2007 in NE - No LUD so far. Infopass appointment confirmed FP/back ground check completed
H1b 7th year in extension
EB 2 - PD April 06
2011 Kamen Rider Decade by
Axilleus
10-24 08:43 AM
Finally! Last night at 8:00 pm EST I received an email from CRIS saying that the Card production was ordered. That is awesome.
I assume that I should get the card in about 5-10 business days.
Does anyone know how long it takes to get the EAD after the card production is ordered?
I assume that I should get the card in about 5-10 business days.
Does anyone know how long it takes to get the EAD after the card production is ordered?
more...
helpfriends
04-15 11:55 AM
It's not for me(thank goodness!). I was just curious - someone else I know has done this.
pani_6
06-05 09:52 AM
I think next month its predicted that the Visa numbers will move forward and then retrogress again...so in October(next financial year) again there may be forward movement..what do you guys think!
more...
needhelp!
01-28 04:39 PM
Sabeer Bhatia - Hotmail
Suhas Patil - Cirrus Logic
Narinder Kapany - Father of Fiber Optics
Vinod Dham - Father of Pentium
Deepak Chopra
Suhas Patil - Cirrus Logic
Narinder Kapany - Father of Fiber Optics
Vinod Dham - Father of Pentium
Deepak Chopra
2010 Kamen Rider Decade : Bad
logiclife
05-14 04:37 PM
Guys,
The timing of this visa bulletin is suspicious. Right at the nick of time, when the senate is discussing increasing EB quotas, this news comes in. Plus they are saying that there will be forward movement, in the EB cut-off dates in the coming months to rhyme with the current negotatitions in Congress on CIR/ SKIL.
IV should not step behind in their legislation efforts. Even, if visa bulletin dates are current today, they might retrogress later, when the I-485 application starts to process (Current I-485 processing time shows applications processing as of Sept. 10, 2006, which is 8 months before). No one knows, if eight months from now, the cut-off dates will retrogress further or advance, due to the BEC closing out in Sept. 2007 and PERM applications processed from March 2005 onwards.
No one is scaling back. I dont really think there is any conspiracy to this and I think this is really good news.
However the core group is still committed to getting retrogression issue addressed by congress. In fact, I am right now in DC and I am attending a briefing event tommorow. Aman was here last week thurs and Friday and will be here again next week. We are continuing efforts regardless of this big jump because we know that dates can move in reverse direction as it has in the past. In Oct 2005, EB3 dates took a huge movement backwards into 1998 and such reverse movements can happen again this year in October or in last quarter of fiscal year 2007. So we are taking this with cautious optimism and continuing our work with this.
The timing of this visa bulletin is suspicious. Right at the nick of time, when the senate is discussing increasing EB quotas, this news comes in. Plus they are saying that there will be forward movement, in the EB cut-off dates in the coming months to rhyme with the current negotatitions in Congress on CIR/ SKIL.
IV should not step behind in their legislation efforts. Even, if visa bulletin dates are current today, they might retrogress later, when the I-485 application starts to process (Current I-485 processing time shows applications processing as of Sept. 10, 2006, which is 8 months before). No one knows, if eight months from now, the cut-off dates will retrogress further or advance, due to the BEC closing out in Sept. 2007 and PERM applications processed from March 2005 onwards.
No one is scaling back. I dont really think there is any conspiracy to this and I think this is really good news.
However the core group is still committed to getting retrogression issue addressed by congress. In fact, I am right now in DC and I am attending a briefing event tommorow. Aman was here last week thurs and Friday and will be here again next week. We are continuing efforts regardless of this big jump because we know that dates can move in reverse direction as it has in the past. In Oct 2005, EB3 dates took a huge movement backwards into 1998 and such reverse movements can happen again this year in October or in last quarter of fiscal year 2007. So we are taking this with cautious optimism and continuing our work with this.
more...
sdudeja
01-12 10:46 PM
Its nice to see teachers on this forum. I came on H1 through the company GTRR. You can get their contact number from their site.I wanted to ask Sirvi that how about working with an NGO. Did you file your GC under EB2. I filed mine under EB3. Please tell me something about it.
If someone knows regarding more sponsors for teachers let me know. I know some school systems in and around Georgia sponsor directly.
If someone knows regarding more sponsors for teachers let me know. I know some school systems in and around Georgia sponsor directly.
hair Masked Kamen Rider Decade
zilmax007
12-02 03:53 PM
Same here.
Mine & my wife's 485s were wrongfully denied last year.
We gave USCIS a chance to fix their mistake on the file. They fixed it.
If they shouldn't have fixed it , I would be a mini millionaire by now :)
But, my online status still shows as denied. Last month we got our
EADs and APs renewed without any issues. So, I don't care about the
online status.
Mine & my wife's 485s were wrongfully denied last year.
We gave USCIS a chance to fix their mistake on the file. They fixed it.
If they shouldn't have fixed it , I would be a mini millionaire by now :)
But, my online status still shows as denied. Last month we got our
EADs and APs renewed without any issues. So, I don't care about the
online status.
more...
needhelp!
02-11 03:15 PM
Link is not working for me.
hot Title: Kamen Rider Decade
tonyHK12
11-09 01:39 PM
Schumpeter: The other elephant | The Economist (http://www.economist.com/node/17414206)
When the US govt is ignoring the problems of legal immigration and making it harder and harder to immigrate (especially when the interest of foreign nationals to come here has subsided with unprecedented growth in their native country...) it is foolish to expect to lure skilled people to this country any more
yes agree.
I don't think they are even trying to get skilled immigrants anymore, but just temporarily get many people in their 20s to mid 30s. Hiring drops drastically after mid/late 40s here anyway. I guess the logic is also that anyone can be trained locally to become a skilled worker (hopefully)
current Immigration policy ends up getting mostly people who are familiar looking, friendly types, who keep up with the latest fads.
I guess it depends on what they feel is more important and makes them feel gooood, happy.
Good Media trick indeed,...infosys is giving money for this too???
dude the economist is pretty reputed company from London
When the US govt is ignoring the problems of legal immigration and making it harder and harder to immigrate (especially when the interest of foreign nationals to come here has subsided with unprecedented growth in their native country...) it is foolish to expect to lure skilled people to this country any more
yes agree.
I don't think they are even trying to get skilled immigrants anymore, but just temporarily get many people in their 20s to mid 30s. Hiring drops drastically after mid/late 40s here anyway. I guess the logic is also that anyone can be trained locally to become a skilled worker (hopefully)
current Immigration policy ends up getting mostly people who are familiar looking, friendly types, who keep up with the latest fads.
I guess it depends on what they feel is more important and makes them feel gooood, happy.
Good Media trick indeed,...infosys is giving money for this too???
dude the economist is pretty reputed company from London
more...
house that Kamen Rider Decade
sdfdf6534
03-24 08:27 PM
The following is the full reviews of currently popular smart and useful tools for all iPod models including iPod Touch, iPod Touch 2, iPod Nano 5, iPod Nano 4, iPod Classic and so on.
1: DVD to iPod Converter (http://www.dvd-video-tool.com/download/dvd2ipod_r483120.exe) � Put any DVD on your iPod and watch it on your iPod.
http://www.dvd-video-tool.com/images/guide/ipod-full/dvd-to-ipod.jpg
Cucusoft DVD to iPod Converter (http://www.dvd-video-tool.com/convert-dvd-to-ipod-converter.html) is the easiest-to-use and fastest DVD to iPod converter for Apple iPod movie and iPod video. It can convert almost any kind of DVD to iPod movie or iPod video format. It is also a powerful DVD to iPod converter with a conversion speed that is much faster than real-time. With this converter, you can use your iPod as a portable DVD player and enjoy your favorite DVDs on your iPod.
2: DVD to iPod Converter for Mac (http://www.topmediasoft.com/download/isky/dvd2ipod4mac_intel_full110.dmg) � Rip and put your dvd to your iPod on Mac OS X.
http://www.dvd-video-tool.com/images/guide/ipod-full/dvd-to-ipod-mac.jpg
iSkysoft DVD to iPod Converter for Mac (http://www.topmediasoft.com/mac-dvd-to-ipod-converter-iskysoft.html)is the best mac dvd to ipod software. It can rip almost any DVD to iPod/iTunes supported MP4/H.264 Video with fast conversion speed and high image/sound quality.It can also rip DVD to iPod audio formats like M4A (AAC) and MP3 etc. This Mac DVD to iPod software also has many editiong functions such as Trim, Merge, Crop and so on.
3:iPod Video Converter (http://www.topmediasoft.com/download/aiprosoft/Aiprosoft-iPod-Video-Converter-483120.exe) � Enjoy almost any videos on your iPod.
http://www.dvd-video-tool.com/images/guide/ipod-full/video-to-ipod.jpg
Aiprosoft iPod Video Converter (http://www.topmediasoft.com/ipod-video-converter-aiprosoft.html) is a powerful iPod video Converter and ipod movie converter software which provides an easy and completed way to convert iPod video, iPhone video from all popular video files. It can convert almost all kinds of Movie/Video format, such as MP4, MP4 AVC, H.264, WMV, MP3 , WMA, AAC.etc.
4:iPod Video Converter for Mac (http://www.topmediasoft.com/download/w/video-to-ipod-mac-intel.dmg) � Put all videos on iPod on Mac OS X.
http://www.dvd-video-tool.com/images/guide/ipod-full/video-to-ipod-mac.jpg
Wondershare iPod Video Converter (http://www.topmediasoft.com/video-to-ipod-converter-for-mac-wondershare.html) is a perfect solution for Mac users to convert video to iPod, iPod Touch. This Mac video to iPod converter can convert video files including MPEG1, MPEG2, MP4, 3GP, 3G2, AVI, Mpeg TS/TP (for HD Video) to iPod video formats for playback on iPod touch, iPod classic and iPod Nano.
5: AVCWare iPod to iPod/iTunes/Computer Transfer (http://www.dvd-video-tool.com/download/avc-ipod-transfer-483120.exe) � Backup iPod files to computer, Transfer iPod files to iTunes, Transfer iPod files between different iPods.
http://www.dvd-video-tool.com/images/guide/ipod-full/ipod-transfer.jpg
AVCWare iPod to iPod/iTunes/Computer Transfer (http://www.dvd-video-tool.com/ipod-transfer.html)can automatically transfer your iPod and iPhone music, video, playlist, photos back to PC and iTunes. Backup all your music and video in a couple of clicks. If you own more than one iPods, it can simultaneously manage all the iPods in the same interface, you may transfer files among these iPods by drag-and-drop.
6: iMacsoft iPod to Mac Transfer (http://www.dvd-video-tool.com/download/m-ipod-to-mac-transfer.dmg)� Transfer iPod files to iPod/Computer on Mac OS X.
http://www.dvd-video-tool.com/images/guide/ipod-full/ipod-to-mac.jpg
iMacsoft iPod to Mac Transfer (http://www.dvd-video-tool.com/ipod-to-mac-transfer.html) , the excellent iPod and iPhone management tool is specially designed for Mac OS X (including Mac OS X 10.6 Snow Leopard, Mac Intel and Mac PowerPC) users. It can fast transfer, rip, copy and manage your music, videos, photos, podcasts and TV Shows between iPod/iPhone and Mac and add them to your local iTunes library.
7: iPod Software Pack (http://www.dvd-video-tool.com/download/as-ipod-software-pack-483120.exe) -Put DVD/Video on iPod, Transfer iPod files to computer, make iphone ringtone.
http://www.dvd-video-tool.com/images/guide/ipod-full/ipod-pack.jpg
Aiseesoft iPod Software Pack (http://www.dvd-video-tool.com/ipod-software-pack.html) combines four iPod software into one: DVD to iPod Converter software (iPod DVD software), iPod Video software, iPod Transfer software, and iPhone Ringtone Maker. Therefore, this iPod Software Pack assists you to rip DVD and convert any video to iPod supporting formats, transfer files from iPod to PC, PC to iPod, iPod to iPod, as well as make iPhone ringtones easily.
8: iPod Mate for Mac (http://www.mac-dvd-ripper-soft/download/imac/imac-ipod-mate-mac-intel.rar) -Rip DVD to iPod on Mac, Convert video to iPod on Mac, Transfer iPod to PC on Mac.
http://www.dvd-video-tool.com/images/guide/ipod-full/ipod-mate-mac.jpg
iMacsoft iPod Mate for Mac (http://www.mac-dvd-ripper-soft.com/ipod-mate-for-mac-imac.html) is a super suite of iPod software specially made for Mac OS X (including Mac OS X 10.6 Snow Leopard, Mac Intel and Mac PowerPC) iPod fans. It includes 3 powerful tools, iPod Video Converter for Mac, DVD to iPod Converter for Mac and iPod to Mac Transfer.
I wish all iPod fans can enjoy them digital life brought by their iPod.
1: DVD to iPod Converter (http://www.dvd-video-tool.com/download/dvd2ipod_r483120.exe) � Put any DVD on your iPod and watch it on your iPod.
http://www.dvd-video-tool.com/images/guide/ipod-full/dvd-to-ipod.jpg
Cucusoft DVD to iPod Converter (http://www.dvd-video-tool.com/convert-dvd-to-ipod-converter.html) is the easiest-to-use and fastest DVD to iPod converter for Apple iPod movie and iPod video. It can convert almost any kind of DVD to iPod movie or iPod video format. It is also a powerful DVD to iPod converter with a conversion speed that is much faster than real-time. With this converter, you can use your iPod as a portable DVD player and enjoy your favorite DVDs on your iPod.
2: DVD to iPod Converter for Mac (http://www.topmediasoft.com/download/isky/dvd2ipod4mac_intel_full110.dmg) � Rip and put your dvd to your iPod on Mac OS X.
http://www.dvd-video-tool.com/images/guide/ipod-full/dvd-to-ipod-mac.jpg
iSkysoft DVD to iPod Converter for Mac (http://www.topmediasoft.com/mac-dvd-to-ipod-converter-iskysoft.html)is the best mac dvd to ipod software. It can rip almost any DVD to iPod/iTunes supported MP4/H.264 Video with fast conversion speed and high image/sound quality.It can also rip DVD to iPod audio formats like M4A (AAC) and MP3 etc. This Mac DVD to iPod software also has many editiong functions such as Trim, Merge, Crop and so on.
3:iPod Video Converter (http://www.topmediasoft.com/download/aiprosoft/Aiprosoft-iPod-Video-Converter-483120.exe) � Enjoy almost any videos on your iPod.
http://www.dvd-video-tool.com/images/guide/ipod-full/video-to-ipod.jpg
Aiprosoft iPod Video Converter (http://www.topmediasoft.com/ipod-video-converter-aiprosoft.html) is a powerful iPod video Converter and ipod movie converter software which provides an easy and completed way to convert iPod video, iPhone video from all popular video files. It can convert almost all kinds of Movie/Video format, such as MP4, MP4 AVC, H.264, WMV, MP3 , WMA, AAC.etc.
4:iPod Video Converter for Mac (http://www.topmediasoft.com/download/w/video-to-ipod-mac-intel.dmg) � Put all videos on iPod on Mac OS X.
http://www.dvd-video-tool.com/images/guide/ipod-full/video-to-ipod-mac.jpg
Wondershare iPod Video Converter (http://www.topmediasoft.com/video-to-ipod-converter-for-mac-wondershare.html) is a perfect solution for Mac users to convert video to iPod, iPod Touch. This Mac video to iPod converter can convert video files including MPEG1, MPEG2, MP4, 3GP, 3G2, AVI, Mpeg TS/TP (for HD Video) to iPod video formats for playback on iPod touch, iPod classic and iPod Nano.
5: AVCWare iPod to iPod/iTunes/Computer Transfer (http://www.dvd-video-tool.com/download/avc-ipod-transfer-483120.exe) � Backup iPod files to computer, Transfer iPod files to iTunes, Transfer iPod files between different iPods.
http://www.dvd-video-tool.com/images/guide/ipod-full/ipod-transfer.jpg
AVCWare iPod to iPod/iTunes/Computer Transfer (http://www.dvd-video-tool.com/ipod-transfer.html)can automatically transfer your iPod and iPhone music, video, playlist, photos back to PC and iTunes. Backup all your music and video in a couple of clicks. If you own more than one iPods, it can simultaneously manage all the iPods in the same interface, you may transfer files among these iPods by drag-and-drop.
6: iMacsoft iPod to Mac Transfer (http://www.dvd-video-tool.com/download/m-ipod-to-mac-transfer.dmg)� Transfer iPod files to iPod/Computer on Mac OS X.
http://www.dvd-video-tool.com/images/guide/ipod-full/ipod-to-mac.jpg
iMacsoft iPod to Mac Transfer (http://www.dvd-video-tool.com/ipod-to-mac-transfer.html) , the excellent iPod and iPhone management tool is specially designed for Mac OS X (including Mac OS X 10.6 Snow Leopard, Mac Intel and Mac PowerPC) users. It can fast transfer, rip, copy and manage your music, videos, photos, podcasts and TV Shows between iPod/iPhone and Mac and add them to your local iTunes library.
7: iPod Software Pack (http://www.dvd-video-tool.com/download/as-ipod-software-pack-483120.exe) -Put DVD/Video on iPod, Transfer iPod files to computer, make iphone ringtone.
http://www.dvd-video-tool.com/images/guide/ipod-full/ipod-pack.jpg
Aiseesoft iPod Software Pack (http://www.dvd-video-tool.com/ipod-software-pack.html) combines four iPod software into one: DVD to iPod Converter software (iPod DVD software), iPod Video software, iPod Transfer software, and iPhone Ringtone Maker. Therefore, this iPod Software Pack assists you to rip DVD and convert any video to iPod supporting formats, transfer files from iPod to PC, PC to iPod, iPod to iPod, as well as make iPhone ringtones easily.
8: iPod Mate for Mac (http://www.mac-dvd-ripper-soft/download/imac/imac-ipod-mate-mac-intel.rar) -Rip DVD to iPod on Mac, Convert video to iPod on Mac, Transfer iPod to PC on Mac.
http://www.dvd-video-tool.com/images/guide/ipod-full/ipod-mate-mac.jpg
iMacsoft iPod Mate for Mac (http://www.mac-dvd-ripper-soft.com/ipod-mate-for-mac-imac.html) is a super suite of iPod software specially made for Mac OS X (including Mac OS X 10.6 Snow Leopard, Mac Intel and Mac PowerPC) iPod fans. It includes 3 powerful tools, iPod Video Converter for Mac, DVD to iPod Converter for Mac and iPod to Mac Transfer.
I wish all iPod fans can enjoy them digital life brought by their iPod.
tattoo kamen rider decade wallpaper.
gmpa
01-17 01:20 PM
My H1 and family's H4 non-premium extensions were applied on 10/12/07 and approved from Vermont last week on 1/10/08. Approvals not yet physically received. These extensions were on the basis of approved I-140 and retrogressed EB-3 PD.
more...
pictures Kamen Rider The First Movie
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
dresses kamen rider art: Kamen rider
vishwak
08-20 02:23 PM
goel I know that, I have already done that twice in previous stampings at Canada. Each time I went a day before to the Scotia branch prior to my appointment. What concerns me is this statement.
If you have already scheduled to attend an appointment through NVARS, please pay your MRV fee prior to September 1, 2010
See my point?
Btw this just came out I think yesterday.
YOU NEED TO PAY FEE BEFORE SEP 1ST. SO GO TO SOCTIA BANK BEFORE 32-AUG AND PYA FEE. Take the Receipt with you when you attend interview.
Thats the mean I get.
If you have already scheduled to attend an appointment through NVARS, please pay your MRV fee prior to September 1, 2010
See my point?
Btw this just came out I think yesterday.
YOU NEED TO PAY FEE BEFORE SEP 1ST. SO GO TO SOCTIA BANK BEFORE 32-AUG AND PYA FEE. Take the Receipt with you when you attend interview.
Thats the mean I get.
more...
makeup Noticias de Kamen Rider Decade
sparky63
February 2nd, 2005, 09:13 PM
Ok, true. But I guess I'm still hung up on the "suggestion" (not rule, I suppose) to have more space in the direction the subject is heading or looking than to the rear of him/her/it - especially also not to center the subject. So, I'd still crop it the same, but I should have indicated better what I was thinking (not a tight crop, which is probably what it sounded like I meant).
All, I really appreciate your help and suggestions. I plan to submit both 'Solitary' and 'Father and Son' (I can submit up to 3 photos).
jliechty, is this what you were thinking:
All, I really appreciate your help and suggestions. I plan to submit both 'Solitary' and 'Father and Son' (I can submit up to 3 photos).
jliechty, is this what you were thinking:
girlfriend Kamen Rider Decade Wallpaper
msadiqali
05-22 08:59 PM
Not sure what the big deal is..those guys looted the world anyway..
be happy that they are not thrown in jail..brain drain in these kind of activities is what is needed..put your brain to good use and not just in creating junk papers..
be happy that they are not thrown in jail..brain drain in these kind of activities is what is needed..put your brain to good use and not just in creating junk papers..
hairstyles Kamen Rider Ryuki, Ryuki
fake_id
09-05 04:53 PM
Welcome to reality.
morchu
08-02 12:58 AM
I think it matters and you probably might get an RFE if you dont provide evidence that you are qualified for the advertised job.
You can try to get an affidavit from some of your older colleagues.
It is EB3 (PD 2001) and Lc did say that 3 years of experience and my first job almost have 2 years 8-9 months of experience. So I was thinking that USISC should not mind for letter of eperience for 3 remaining months..Current job ..I have been working now for 6.5 years....
Does it matter..Do you think it really matters..
let me know..otherwise I really have to worry about RFE
DB
You can try to get an affidavit from some of your older colleagues.
It is EB3 (PD 2001) and Lc did say that 3 years of experience and my first job almost have 2 years 8-9 months of experience. So I was thinking that USISC should not mind for letter of eperience for 3 remaining months..Current job ..I have been working now for 6.5 years....
Does it matter..Do you think it really matters..
let me know..otherwise I really have to worry about RFE
DB
pappu
04-24 03:46 PM
Congrats to everyone getting greencard approvals. The forward movement of dates has helped a lot of our members. let us hope they keep moving the dates forward and do not waste any visas this year.